CHASSIS CAB
TRUCK WITH BODY
DUMP TRUCK/MINING TRUCK
CARGO TRUCK
CONCRETE TRUCK
LOGGING TRUCK
CRANE TRUCK
GARBAGE TRUCK
TANKER TRUCK
PUMP TRUCK
ALL WHEEL DRIVE TRUCK
OTHER SPECIAL VEHICLE
FIRE FIGHTING TRUCK
MUTIFUCTION TRUCK
SERVICE TRUCK
WORKSHOP TRUCK
SEWAGE SUCTION TRUCK/ SEWER DREDGE VEHICLE
RECOVERY TRUCK
SWEEPER TRUCK
AERIAL CAGE TRUCK
TERMINAL TRACTOR
WRECKER TRUCK
CHIP SPREADER TRUCK
TRUCK BUS
MOBILE CLINIC
WORKING RANGE OF BRIDGE INSPECTION PLATFORM VEHICLE
FUEL HYDRANT DISPENSER/FUELING EQUIPMENT
AIRCRAFT REFUELLER TRUCK
AIRCRAFT TRACTOR
WORKOVER RIG
ARMORED VEHICLE
LIGHT TRUCK
SECOND HAND TRUCK/MACHINARY
CONSTRUCTION MACHINARY
TRAILERS&SEMI-TRAILERS
FULL TRAILER
CONTAINER TRAILER
LOW BED TRAILER
BULK CEMENT TRAILER
FUEL TANKER TRAILER/MIXER TANK TRAILER
LOGGING TRAILER
FLAT BED CARGO TRAILER
DUMP TRAILER
STAKE/VAN CARGO TRAILER
LPG TANK TRAILER
SKELETON TRAILER
CAR CARRIER TRAILER
SWING VAN TRAILER
CONTAINER SIDE LOADER TRAILER
MIXER TRAILER
SEMI-TRAILER TYPE MICRO SURFACING /SLURRY SEALER
HAND SPRAYED ASPHALT DISTRIBUTOR TRAILER
JETTING MACHINE TRAILER
SPARE PARTS
GENERATOR SET
‹
›
‹
›
- Product Description -
SINOTRUK HOWO 8x4 12 wheeler MOUNTED XCMG CRANE TRUCK with Auger Torque Earth drill for drilling telegraph poles
SINOTRUK HOWO 8x4 12 wheeler MOUNTED XCMG CRANE TRUCK with drill for pulling telegraph pole
Original offered specifications | Offered Specifications |
SINOTRUK HOWO 8 x 4 MOUNTED CRANE TRUCK (with drill) | SINOTRUK HOWO 8 x 4 MOUNTED CRANE TRUCK (with drill) |
Model: ZZ1317N4667W | ZZ1317N4667W |
Cabin: Long cabin with A/C, Single Sleeper | Cabin: Long cabin with A/C, Single Sleeper |
Gearbox: 10 forwards & 2 reverse, manual | Gearbox: 10 forwards & 2 reverse, manual |
Front Axle: 2 x 9000 KG | Front Axle: 2 x 9000 KG |
Rear Axle: 2 x 16000 KG | Rear Axle: 2 x 16000 KG |
Steering: ZF Steering | Steering: ZF Steering |
Tyre: 12.00R20, 11 pieces | Tyre: 12.00R20, 11 pieces |
Body dimensions: (LxWxH): 7600 x 2300 x 800mm | Body dimensions: (LxWxH): 7600 x 2300 x 800mm |
Body Thickness: bottom 4mm, side 2mm | Body Thickness: bottom 4mm, side 2mm |
Crane Model: SQS500K | Crane Model: XCMG SQ12SK3Q |
Maximum lifting quality: 20000 KG | Maximum lifting quality: 12000 KG |
Maximum lifting moment: 50T.M | Maximum lifting moment: 30T.M |
Max Oil Flow of Hydraulic System: 120L/min | Max Oil Flow of Hydraulic System: 63L/min |
Rated pressure of hydraulic system: 26 Mpa | Rated pressure of hydraulic system: 26 Mpa |
Oil Tank capacity: 360L | Oil Tank capacity: 160L |
Rotary Engle: 360 degrees all rotation | Rotary Engle: 360 degrees all rotation |
Auger/drill Model: 7000 2K | Auger/drill Model: 7000 2K |
Diameter of auger hole: 450mm | Diameter of auger hole: 450mm |
Depth of auger / drill hole: 3.5M | Depth of auger / drill hole: 3.5M |
Nominal pressure of the drill: P = 15 MPA | Nominal pressure of the drill: P = 15 MPA |
Maximum hydraulic system flow Q = 60L / min | Maximum hydraulic system flow Q = 60L / min |
Engine Type: 25-2309-2H | Engine Type: 25-2309-2H |
screw mounting hole 2XM10 | screw mounting hole 2XM10 |
- Message -
- Products Recommended -